#STB LOGO INSTALL#
#STB LOGO UPGRADE#
#STB LOGO SOFTWARE#

Wait for completion logo installationwhich is reported by the message: ' Logotype set successfully'.Informational messages referring to logo installation are displayed on the screen.

#STB LOGO UPGRADE#

In System Recovery Utility menu, run the command: Upgrade Tools ⇒ Set Logotype ⇒ Using USB.

Logo setting from System Recovery Utility Example for MAG322, the directory name: mag322. Logo file should be previously written on a USB drive, in mag directory, where - number of STB model (256, 322, 324, 349, 351, 420. Requirements to logo files for various STB models are described above. This kind of logo installation is used in MAG256/3xx/4xx and all subsequent models. Permissible formats and maximum image resolution ( max.res.) of logo for different STB models are as follows: Infomir logo ( file ) for each STB model included in manufacturer's Operator Utilities.Įxample of a logo for STB MAG254: Requirements to logo file

#STB LOGO SOFTWARE#

Infomir logo appearance depends on models and software version of STB. The logo file must be put on the TFTP server.Īdditional parameters of displaying during STB booting ( logo coordinates on the screen, the font color of info messages, logo background color) are set with environment variables that can be set during the building process (with env.txt file), transferred to STB from DHCP server or set on STB via SSH connection (with fw_setenv command), depending on the method of logo setting. This method requires that DHCP and TFTP servers be appropriately configured. Logo setting with DHCP / TFTP server - usually used by operators for group updates (simultaneously on several STB) of the Bootloader logo.The script is run in terminal application/shell connected via SSH. Logo setting on MAG250/254/270 models is performed with an additional script placed along with a logo file to the USB drive. Logo setting on MAG256/3xx/4xx and newer STB m odels are run from System Recovery Utility. The logo file is placed on USB drive connected to STB: Logo setting from USB drive - performs by users, separately for each STB.The following methods of installing/changing Bootloader logo are provided: The bootloader logo that installed in a manner will be valid until updated to a new version of STB software.

#STB LOGO INSTALL#

STB users and operators are also allowed to install in STB their own version of the bootloader logo ( Operator logo). The requirements to the logo file are given below. In the case of self-creating a software image (version) by Operator, the bootloader logo can be installed in the image within building process: the logo file should be placed in the directory with Image-making operators utilities, the path to the logo file is specified in the profile (see Key points of image-making). Instead of the default logo, a specific Operator logo can be installed at the factory in STBs of a particular batch, on operator request. The logo of Bootloader is displayed on the screen within the STB loading process (before portal loading).īy default, in open platform STBs, the m anufacturer's logo ( logo Infomir) is installed at the factory.

Stb logo